The Estate Pipe FAQ/Photo/Tricks of the Trade Thread

One of the most enjoyable parts of our hobby (in my opinion) is finding, refurbishing, and savoring an estate pipe. This thread is for any questions, experience, photos, or tricks you have to share regarding the art, science, and experimentation surrounding estate pipes. I'll kick it off with an abbreviated step by step that offers a generic outline of my process:

1. The first step for me is cleaning out the stem. I do this with isopropyl alcohol and a combination of bristle and regular pipe cleaners. I used to prefer Everclear or Bacardi 151 but when I quit imbibing I no longer had a reasonable way to use up the remainder of the bottle :) The point is to use something that will evaporate quickly after it cleans and sanitizes.
http://i495.photobucket.com/albums/r...b/DSC03955.jpg

2. I then ream the bowls. I typically do this with a combination of a reamer and a pen knife- the latter being my preference. I like to take mine down to only the slightest layer of cake (1/16")- or just above bare briar. I then wipe the bowls out with a bit of alcohol and paper towels:
http://i495.photobucket.com/albums/r.../SSPX00921.jpg

3. Next is the salt treatment. I fold over a pip cleaner and tuck it into the shank of the pipe before filling the bowl with kosher salt. I then take my alcohol of choice and soak the salt using an eyedropper. The eyedropper prevents getting the alcohol on the outside of the bowl where it can damage the finish. A trick I've learned is to sit the bowls in a plate of rice in order to keep them supported and upright. Afterwards, when it has leaked out tar and booze, cook it and feed it to someone you don't like ;)
http://i495.photobucket.com/albums/r.../SSPX00901.jpg

4. I now return to the stems that I scrub with a micro-abrasion polishing pad, followed by a magic eraser (sometimes toothpaste with baking soda can work nicely as well):
http://i495.photobucket.com/albums/r...b/DSC03954.jpg

continued in next post...

5. I return to the bowls. After the salt has leeched out all the nasty goodness (this may take 2-3 treatments of 2 hours a piece), I dump out the salt, remove the pipe cleaner, and wipe the inside with a paper towel. I then sit the bowls in an egg carton to dry for a day:
http://i495.photobucket.com/albums/r.../SSPX00911.jpg

6. I like to polish using beeswax and a dremel tool with a buffing head (along with a polishing rag and some elbow grease):
http://i495.photobucket.com/albums/r.../SSPX00931.jpg

7. Final product, ready to be paired up and enjoyed:
http://i495.photobucket.com/albums/r.../SSPX00951.jpg

http://i495.photobucket.com/albums/r...b/DSC03956.jpg

Great post Tobias. Thanks a lot.

I picked up my first two yesterday while the wife and I were out hitting up some antique stores.

I got one that says Willard Imported Briar on the side. It is a straight pipe.
The other one is a straight pipe as well and looks similar to the Willard but has no markings at all.
I have no idea what they're worth but I only paid $25 for the pair so I think I'll be fine.

I wish I would have taken pics, but they're soaking in the salt/alcohol treatment now. I cleaned up the stems last night as well.

Looking forward to doing this more. Planning on doing some yard sale-ing when the weather warms up and I'll be on the lookout.

I have posted this elsewhere but since this looks like it will be a dedicated "How To" thread on cleaning up estates I think it's worth the repeat here. Due to the image restrictions I'm going to have to bust this up into several posts.
-----------------------------
I have seen a few threads on how to clean up an estate briar but only a few on cleaning up a meer. I have cleaned up two meers now and this post shows the steps I went through to clean up my second. Some of the information here was borrowed (see stole) from other sources online, and some of it I came up with myself after running into road blocks.
I'll start off by posting before and after pictures of the first meer I cleaned. It's a smooth billard with an acrylic stem and I really don't know whether it is block or pressed meerschaum, but after this second pipe I'm going to guess at pressed (more on that later).

Before:
http://i222.photobucket.com/albums/d...ps6fb6e04b.jpg
After:
http://i222.photobucket.com/albums/d...ps71b44a2b.jpg

The second Meerschaum in question I picked up a few weeks ago in a local antique store for $20. This is what it looked like when I got it.

http://i222.photobucket.com/albums/d...ps6cc1067c.jpg

I am not sure if the stem on this pipe is bake lite or amber.

As you can see from the picture, the previous owner was not all that concerned about cake building up in his meer (very similar to the first). I brought out my senior style reamer and commenced (very carefully) to ream it out as much as I could. I have found you can only ream so much cake from a meer before other avenues are required. This is when I break out the sand paper (starting with 220 grit) and wrap it around the reamer. A loose fit works just fine as long as the sand paper will actually turn in the bowl.

http://i222.photobucket.com/albums/d...psb106af83.jpg

Keep an eye on the dust you dump out of the bowl. You don't want to remove actual Meerschaum, just cake.

http://i222.photobucket.com/albums/d...ps3156c936.jpg

When the reamer stopped producing results, but I still had a noticable amount a cake in the bowl, I grabbed a deep socket that would fit in the bowl and wrapped a bit of electrical tape around it. I then wrapped the sand paper around that and kept at it.

http://i222.photobucket.com/albums/d...ps26c4b95e.jpg

http://i222.photobucket.com/albums/d...psb4198adb.jpg

Once this stopped producing desired results I switched to wrapping a bit of sand paper around my finger...and I kept at it.

http://i222.photobucket.com/albums/d...ps26c39bff.jpg

The last thing I use is 000 then 0000 grade steal wool and twist it in the bowl to smooth everything out. I forget to get a pic of this process but this is the piece of steal wool I used.

http://i222.photobucket.com/albums/d...psa5f50b99.jpg

I will also take a piece of steal wool, unravel it flat, and run the top of the bowl over it on a flat surface a few times to smooth out any scratches.

Here is where I decided enough was enough.

http://i222.photobucket.com/albums/d...ps8d861420.jpg

For the most part, I cleaned the stem like I would any other. Scrubbed with pipe cleaners and alcohol until it came out pretty clean. Soaked in Oxyclean and water for 24 hours and then went at it with an Arm and Hammer Magic Eraser to remove any crud. With vulcanite I may have continued with micro finishing cloth abrasive pads but did not feel it was necessary with this stem.

http://i222.photobucket.com/albums/d...ps52479b49.jpg

Here is where we are up to this point.

http://i222.photobucket.com/albums/d...pscb9575f0.jpg

Waxing is where I started to get into unknown territory and may have mucked it all up. I have watched people melt bees wax, cork bowls, and place some type of stopper in the shank, then put the pipe in there and just stir it around. I wasn't going to do all that.

I saw a youtube of a guy that melted beeswax on a paper towel, smoked his pipe, held the pipe in the towel, and just rubbed it now and then. I did this with the smooth billard and it worked great, giving it a nice shine. On this pipe, the results were quite different.

First, instead of a paper towel I used a micro fibre cloth purchased at Harbor Freight.

http://i222.photobucket.com/albums/d...ps04b85b13.jpg

I packed my pipe with some Three Nuns and fired her up.

http://i222.photobucket.com/albums/d...psb345ba93.jpg

http://i222.photobucket.com/albums/d...ps1458e87f.jpg

I was amazed at how much wax this pipe sucked up and how it immediately started to color. This is what I think a lot of people refer to as false coloring a meer. I'm really not sure whether it would have been better to not use wax at all but here is what the pipe looked like after just one smoke.

http://i222.photobucket.com/albums/d...psbb59a227.jpg

http://i222.photobucket.com/albums/d...ps9b556cc2.jpg

I'm starting to suspect that the first pipe was pressed meer, hence why it didn't suck up as much wax, and that this one was block.
This pipe has had two bowls through it now and I'm happy to say it's a good smoker. I hope y'all enjoyed seeing the process and as I learn more I'll share.

Kind of interesting. The closing pics were taken while the bowl was still hot. It has since cooled and much of the color has disappeared.

http://i222.photobucket.com/albums/d...psa9fb9764.jpg

http://i222.photobucket.com/albums/d...ps3bb40149.jpg

You guys just saved me a ton of work ;)

Quote:

---

Originally Posted by Branzig

You guys just saved me a ton of work ;)

---

Most of what I learned was from your original thread, Brandon.